cystech electronics corp. spec. no. : c173e3 issued date : 2015.04.10 revised date : 2015.08.25 page no. : 1/1 SKT10100E3 cystek product specification 10amp. trench schottky ultra low rectifier SKT10100E3 i f(av) 2 x 5a v rrm 100v v f at 125c 0.58v tj 150 c features ? 150 operating junction temperature ? softest, fast switching capability ? high reverse surge capability ? reduced ultra-low forward voltage drop (vf) ; better efficiency and cooler operation. ? lead-free finish; rohs compliant ? trench technology provides a superior avalanche capability mechanical data ? case: jedec to-220 molded plastic ? weight: 2.24 grams approximately ? terminals: pure tin plated, lead-free, solderable per mil-std-750 method 2026 ? epoxy: ul 94v-0 rate flame retardant ? polarity: as marked. ? mounting torque: 5 in-lbs max equivalent circuit outline
cystech electronics corp. spec. no. : c173e3 issued date : 2015.04.10 revised date : 2015.08.25 page no. : 2/2 SKT10100E3 cystek product specification maximum ratings and electrical characteristics ( rating at 25 c ambient temperature unless otherwise sp ecified. single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%.) parameter symbol min. typ. max. units maximum dc blocking voltage v dc 100 v maximum recurrent peak reverse voltage v rrm 100 v maximum rms voltage v rms 70 v t c =25 c 0.39 - instantaneous forward voltage at i f =2a per diode t c =125 c v f 0.35 - v t c =25 c 0.65 0.72 instantaneous forward voltage at i f =5a per diode t c =125 c v f 0.58 0.66 v v r =100 v, t c =25 25 80 a reverse current per diode v r =100 v, t c =125 i r 2 12 ma maximum average forward rectified current per device i f(av) 10 a maximum average forward rectified current per diode i f(av) 5 a non-repetitive peak forward surge current @ 8.3ms single half sine wave superimposed on rated load (jedec method) per diode i fsm 80 a peak repetitive reverse surge current (2us-1khz) i rrm 2 a storage temperature range t stg -55 150 operating junction temperature range t j -55 150 thermal data parameter symbol value unit typical thermal resistance, junction-to-case r th,j-c 2 c/w typical thermal resistance, junction-to-ambient r th,j-a 60 c/w ordering information device package shipping SKT10100E3-0-ub-s to-220 (pb-free lead plating ) 50 pcs/tube, 20tubes/box, 4boxes/carton environment friendly grade : s for rohs compliant products, g for rohs compliant and green compound products product rank, zero for no rank products packing spec, ub : 50 pcs / tube, 20 tubes/box product name
cystech electronics corp. spec. no. : c173e3 issued date : 2015.04.10 revised date : 2015.08.25 page no. : 3/3 SKT10100E3 cystek product specification typical characteristics
cystech electronics corp. spec. no. : c173e3 issued date : 2015.04.10 revised date : 2015.08.25 page no. : 4/4 SKT10100E3 cystek product specification recommended wave soldering condition product peak temperature soldering time pb-free devices 260 +0/-5 c 5 +1/-1 seconds recommended temperature profile for ir reflow profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate (tsmax to tp) 3 c/second max. 3 c/second max. preheat ? temperature min(t s min) ? temperature max(t s max) ? time(ts min to ts max ) 100 c 150 c 60-120 seconds 150 c 200 c 60-180 seconds time maintained above: ? temperature (t l ) ? time (t l ) 183 c 60-150 seconds 217 c 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak temperature(tp) 10-30 seconds 20-40 seconds ramp down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note : all temperatures refer to topside of the package, measured on the package body surface.
cystech electronics corp. spec. no. : c173e3 issued date : 2015.04.10 revised date : 2015.08.25 page no. : 5/5 SKT10100E3 cystek product specification to-220 dimension important notice: eproduction in whole or in part is prohibited without the prior written approval of cystek. ystems. gn, infringement of pat ents, or application assistance . ? all rights are reserved. r ? cystek reserves the righ t to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitab le for use in life-support applications, or s ? cystek assumes no liability for any consequence of customer pr oduct desi
|